Issiq suvli yorug'lik egzoz trubkasi radiatorining batafsil kiritilishi
The light exhaust pipe radiator can exert a good heat dissipation effect, and the prerequisite at that time is to have good water quality, because if there is a problem with the water quality, it will have a lot of adverse effects on the radiator. The problematic water will contain many impurities. These impurities may corrode the inner wall of the heat dissipation tube of the light exhaust tube radiator, which will shorten the service life of the equipment.
Just like ordinary radiators, light-pipe radiators also need internal anti-corrosion treatment. This is an anti-corrosion measure that must be taken for radiators of any material, except for all-copper waterway radiators of course. And some requirements are put forward for its internal anti-corrosion treatment fluid, such as uniform anti-corrosion layer, stable adhesion, and no shedding is allowed.
There are two types of light pipe radiators. Because the radiator blends in different media, there are two types of light pipe radiators, A type and B type, A type general steam and heat transfer oil, B type general water, high steam pressure, The processing technology is that the riser pipe is larger than the main pipe, the pressure-bearing capacity is enhanced, the A-type water flow, the main pipe is larger than the off-pipe, which increases the water flow and power, and increases the heat dissipation. Both have different advantages.
The tube wall of the light radiator is 3.5mm-4mm after the comparison of the tube wall during the production, so its service life is relatively long, almost comparable to that of the pipeline. At present, the light radiator should be a radiator that is easy to clean, because this radiator directly contacts the air to transfer heat. If the radiator is covered by dust, it will directly affect the radiator. Therefore, it is enough to clean the heat dissipation pipe, and it will not affect the heat dissipation.
